05-17-2012, 01:46 AM
To measure current flow there has to break in the circut so that you can hook the meter between the break so the the current has to flow through the meter.
You can either disconnect the battery and hook the meter between the cable and the battery and then start pulling fuses like was suggested or you can leave the battery hooked up and pull one fuse at a time and measure to see if there is any current on the meter when you touch the leads to each side of the fuse contacts. If you see either the needle move or the numbers for a digital screen go up then you will know that there is something in that circut the is creating a drain on your battery.
[signature]
You can either disconnect the battery and hook the meter between the cable and the battery and then start pulling fuses like was suggested or you can leave the battery hooked up and pull one fuse at a time and measure to see if there is any current on the meter when you touch the leads to each side of the fuse contacts. If you see either the needle move or the numbers for a digital screen go up then you will know that there is something in that circut the is creating a drain on your battery.
[signature]
Live to hunt----- Hunt to live.