07-28-2011, 04:29 PM
[#500000]I made my own rod turner this past winter and used it to make several rods. Videos/DVDs are ok I guess, but you can get fly rod building 101 lessons from [/#500000][#500000]flyrodcrafters.com.[/#500000]
[#500000]They have spacing charts and complete rod building instructions that you can print and check off as you go, and you don't have to replay a video a hu[/#500000][#500000]ndred times.[/#500000]
[#500000][/#500000]
[#500000]The only problem I had was making sure that I didn't get anything on the final coats. I did it on my patio table after I sprayed it with water. Then I designed a clear plastic sheet tent to go over the turner to keep the dust away. [/#500000]
[signature]
[#500000]They have spacing charts and complete rod building instructions that you can print and check off as you go, and you don't have to replay a video a hu[/#500000][#500000]ndred times.[/#500000]
[#500000][/#500000]
[#500000]The only problem I had was making sure that I didn't get anything on the final coats. I did it on my patio table after I sprayed it with water. Then I designed a clear plastic sheet tent to go over the turner to keep the dust away. [/#500000]
[signature]