09-24-2007, 06:16 PM
Fish2dMax -
Sorry I haven't responded to your suggestions sooner.Your advice is good, and I'm gonna use it.
BTW, that's why I wanted to see Saberfish' pix of how he mounted it. I too, think the answer is to mount the bracket to where it is about 1/4" above the hull line.
I took the boat to the Nelle Saturday and part of that trip was to see how the water under the hull at the transom/hull point "acted". I've got really clean water, (little turbulence), where I had considered mounting the bracket. I thought it wise to confirm that before I uncorked the epoxy.
I like your 20 degree angle suggestion; I'll sand away.
Thanks for your help on this project. Thanks for taking the time to advise...
Toyguy
[signature]
Sorry I haven't responded to your suggestions sooner.Your advice is good, and I'm gonna use it.
BTW, that's why I wanted to see Saberfish' pix of how he mounted it. I too, think the answer is to mount the bracket to where it is about 1/4" above the hull line.
I took the boat to the Nelle Saturday and part of that trip was to see how the water under the hull at the transom/hull point "acted". I've got really clean water, (little turbulence), where I had considered mounting the bracket. I thought it wise to confirm that before I uncorked the epoxy.
I like your 20 degree angle suggestion; I'll sand away.
Thanks for your help on this project. Thanks for taking the time to advise...
Toyguy
[signature]