09-05-2007, 02:24 AM
Majja,
I can't help with a location, but don't use the ACX stuff. Marine plywood is a totally different thing than stuff you buy at Home Depot. The marine plywood I used to replace my transom was 3/4" thick. I had to glue two pieces together to get the 1.5" thick. The marine plywood had 17 plys with no air-voids. The ACX stuff is about 7-9 plys and has air voids. Just look at the edges when you cut it. Don't skimp and hold out for the marine grade. By the way, I paid about $80 for one 4'x8' sheet of 3/4" about 5 years ago. The stuff is expensive, but it has worked awesome.
[signature]
I can't help with a location, but don't use the ACX stuff. Marine plywood is a totally different thing than stuff you buy at Home Depot. The marine plywood I used to replace my transom was 3/4" thick. I had to glue two pieces together to get the 1.5" thick. The marine plywood had 17 plys with no air-voids. The ACX stuff is about 7-9 plys and has air voids. Just look at the edges when you cut it. Don't skimp and hold out for the marine grade. By the way, I paid about $80 for one 4'x8' sheet of 3/4" about 5 years ago. The stuff is expensive, but it has worked awesome.
[signature]