05-23-2004, 01:27 AM
if it has 3 screws in the lower unit there should be 2 on one side and a phillips head screw on the other.
DO NOT TAKE THE PHILLIPS HEAD OUT! ! ! ! ! ! or you will be bringing to me to put the lower shift forks back together
take the regular head screws out and let it drain and check for water and metal shaving if you have either you shold bring it to me to fix
then after all the old oil drains out put some lower unit oil in from the BOTTOM first pump it in until it comes out the top. this way you know for sure that its full and theres no air pockets in it. put the top screw in and this will create a vacume and give you a couple seconds to get the bottom plug in.
the sell hand pumps that screw onto the oil jugs that work great or if you'd like I'll let yo borrow mine or bring er by I'll do it for ya and show you how its extremly easy.
DZ
[signature]
DO NOT TAKE THE PHILLIPS HEAD OUT! ! ! ! ! ! or you will be bringing to me to put the lower shift forks back together
take the regular head screws out and let it drain and check for water and metal shaving if you have either you shold bring it to me to fix
then after all the old oil drains out put some lower unit oil in from the BOTTOM first pump it in until it comes out the top. this way you know for sure that its full and theres no air pockets in it. put the top screw in and this will create a vacume and give you a couple seconds to get the bottom plug in.
the sell hand pumps that screw onto the oil jugs that work great or if you'd like I'll let yo borrow mine or bring er by I'll do it for ya and show you how its extremly easy.
DZ
[signature]