03-29-2020, 01:59 AM
OK, ready to start pouring. It turns out I have three foams I can test.
One is a flexible foam that will bend and flex, yet float well.
One is a ridgid foam, about the density of balsa, but a bit stronger. It will be interesting to see if this one works.
The third, AlumiFoam, is stronger then most wood, floats well, but not as well as the other two. I have tested this with a hammer and it almost can't be broken. Strong stuff. If it floats well enough, this one will work.
Close, very close. I will let the silicone cure one more day.
any driver policy
One is a flexible foam that will bend and flex, yet float well.
One is a ridgid foam, about the density of balsa, but a bit stronger. It will be interesting to see if this one works.
The third, AlumiFoam, is stronger then most wood, floats well, but not as well as the other two. I have tested this with a hammer and it almost can't be broken. Strong stuff. If it floats well enough, this one will work.
Close, very close. I will let the silicone cure one more day.
any driver policy