09-29-2019, 09:34 PM
It might take you some time to get set up to troll six rods but if you are brave enough to try it someday, there is several ways to do it. Two rods on side planners, on opposite sides of the boat, two rods at 90 degrees, on each sides of the boat, finally two rods straight out the back of the boat, if I do that, I usually use lead core line, so there is less chance of the lines getting tangled. Another option is to use a mast system and run lines on each side of your boat, IMO, this is the most difficult, not to put out but to keep from getting tangled but it can be done. The last option is to run 4 planer boards, two on each side, then run two rods straight out the back or at 90 degrees to each side of the boat.
[signature]
[signature]