Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electric Motor Set Up
#2
[#0000FF]Welcome aboard. The Endura is probably the most popular motor for tubers and tooners. Reasonable price and good performance.

In your picture you are showing how the motor will arrive in the box. That will push your toon forward in the forward gears...which makes it difficult to steer. You will want to turn the head around 180 degrees as shown in the attached writeup. That will PULL you backwards in forward gears.

Some tooners decide they would rather go forward after all and set up their motor mounts in front of the seats. That works but it makes fishing more difficult and is potentially hazarous to your lower extremities if they come in contact with the prop.

About the 5 speeds. Those are achieved by rotating the control handle and feeling for the clicks. In the lower ranges there is no great noticeable difference. But when you shift to top speed there is a noticeable jump. The lower speeds are good for slow trolling, bottom bouncing or just slowly working your way to another location. Top speed is for getting a long way from where you start to where you want to be.

Come on back if you have additional questions.
[/#0000FF]
[signature]
Reply


Messages In This Thread
Electric Motor Set Up - by RickinWaSt - 09-16-2017, 11:05 PM
Re: [RickinWaSt] Electric Motor Set Up - by TubeDude - 09-16-2017, 11:56 PM

Forum Jump:


Users browsing this thread: 4 Guest(s)